HOW TO USE:

Download the Age-R Device User Guide for step-by-step instructions.

1. Before Use. Turn on device by holding the button for more than 2 seconds.
   Shortly press the mode button to switch modes. Change the level by briefly pressing the power button 
   Use 1-3 times a day: Booster Mode, MC Mode, Derma Shot Mode
   Use 2-3 times a week : Air Shot Mode

2.  Air Shot Mode. 
   1. the first step to achieving glass skin is to smooth your skin texture. Gently exfoliate using the Air Shot mode.
   2. Brush against dry skin 2-3 times a week. (5 minutes per use).
   3. Use it on dry skin by sweeping the device head from the inside to the outside.
3. Booster Mode.
   1. No matter what skincare you use, Booster Mode enhances absorption, giving you the ultimate glass glow skin.
   2. Absorb skincare using Booster Mode 1-3 times (use 5-10 minutes per use)
   3. Use it after applying skincare, and set it to level 1 when using it for the first time.
   4. Roll it on the skin in a circular motion from the inside to the outside.
      *When used with a high-performance serum, Booster mode can enhance the effects.
4. MC Mode.
   1. To boost your skin's firmness, absorb your cream with MC mode.
   2. Use 1-3 times a day, in an upward motion by adhering the head to the skin (5-10 minutes per use)
   3. Use it after applying skincare by pulling upward from the inside to the outside.
      *Especially, use it around the eyes, mouth, and nasolabial folds. When used with a cream, MC Mode enhances skin volume.
5. Derma Shot Mode.
   1. Use Derma Shot mode to contour and firm skin, emphasizing your cheekbones and jawline.
   2. Use 1-3 times daily, pausing for 1-2 seconds on the desired area. (5-10 minutes per use)
   3. Slowly draw a circle or massage outward to relax your muscles.
      *When used with a cream, Derma Shot Mode boosts your skin elasticity.

WHAT'S INCLUDED:

• AGE-R Booster Pro
• User Manual
• USB Charging Cable

! IMPORTANT ! No exchange or refund is allowed if the box was opened or if the product has been used.

FAQs:

How is it different from the original Booster-H? With a higher skin permeability than the existing Booster-H, active ingredients are delivered thoroughly for more powerful radiance care. You can see more powerful effects with a larger device head, central LED and vibration care.

How is it different from the original ATS Air Shot? Unlike the existing Air Shot, it is designed to operate even when only one electrode is touched. It can be used by lightly grazing the edge of the head, allowing for more convenient and delicate care. The device is more effective and less irritating than the prior device.

How is it different from the existing Derma EMS Shot? The existing Derma EMS Shot technology stimulates muscles to help manage swelling and elasticity. Booster Pro's derma shot mode applies a frequency more optimised for facial muscles than the existing Derma EMS Shot, providing a stronger facial contour care effect.

Do I need to use the dedicated gel when using derma shot mode? No. It can be used without the dedicated gel by applying the appropriate frequency to the facial muscles. Please use it together with skincare you normally use.

I'm curious about the order of use. Can I use all 4 modes in the same routine? Yes, four modes can be used simultaneously. After using the air shot mode for dry skin, use the booster, microcurrent, and derma shot modes along with the skincare you normally use.

What is the usage cycle for each mode? Be sure to check the usage cycle before use, and adjust the usage cycle and usage time according to your skin type.

How should I use skincare when using the booster, mc, and derma shot modes simultaneously? Absorb a light serum and ampoule in booster mode, then follow with a rich, viscous cream/gel formulation. After booster mode care, use mc mode and derma shot mode with the remaining amount on the skin without applying additional skincare. If the intensity feels too low, add additional product.
*The above usage method is suggested for simple understanding. Find the method that suits you best while using it.

Can all 4 modes be used around the eyes? All four modes of Booster Pro can be used around the eyes, and MEDICUBE recommends using level 1 for areas with thin skin, such as around the eyes, nose, and mouth.

It’s too bright even when I close my eyes. The LED seems to be too strong. Is this okay? It may feel too bright but it has no effect on your eyes and is safe to use. However, if there is a lot of product on the head and the central LED operates even without contact with the skin, be careful of direct eye exposure.

Is it defective if there are scratches on the device head? MEDICUBE used surgical steel, which is commonly used in medical devices such as scalpels and syringe needles, for the device head. While it is non-allergenic and rust-resistant, slight scratches may occur during the manufacturing or cleaning process due to the characteristics of surgical steel.

Is it defective if there are scratches on the LED head? The lines on the booster pro LED section are not scratches but marks formed during plastic production. It is safe to use and is not defective.

CAUTION

1. For external use only.
2. Use only as directed.
3. Avoid contact with eyes.
4. Do not use on wounds, rashes, broken or damaged skin.
5. Discontinue use if redness or irritation occurs and consult a physician if needed.
6. Protect the product from excess heat or direct sunlight.
7. Do not store at high temperatures.
8. KEEP OUT OF REACH OF CHILDREN.

All of our international services are handled by DHL Express and local deliveries are handled by either DHL Express or Maltapost.

All of our deliveries are provided with a tracking number to make sure you can locate and track your orders any time. You will be given a tracking number as soon as your order is shipped.

When possible, you will also receive notifications for shipping updates regarding your order so you will be advised when the shipment is arriving to your specified address.

Read more:

Shipping policy

Returns and refunds